Filter
Top Products
4 - 5
4. DAILY OPERATION/MAINTENANCE
4.3 Installing (or Replacing) Pens (Pen model)
CAUTION
Plotter pen
(1) Open the front door, and check to see that the recording is OFF, but the power ON
is allowed.
(2) Pull and open the display around the hinge.
(3) Pull out the pen-cartridge by pulling the protruding part of the cartridge from the
pen holder.
Pen holder
Plotter pen
(4) Remove the cap from a new pen, and insert the pen firmly to the pen holder.
Always make sure to remove the pen cap before installation.