Filter
Top Products
6 - 16
6.6 Setting Date/Time (CLOCK)
Key operation Indication Description
Press the [DISP] key for three seconds to enter the SET mode,
and select [ ] by pressing the [ ] key. Then press
the [ENT] key.
First, set the year, month and day.
The two digits on the left side of the display indicate the year.
The five digits on the right side of the display indicate the
month and day.
After finishing the setting, press the [ENT] key.
Set the hour and minutes. After finishing, press the [ENT]
key. The seconds will be automatically set to 0.
[ ] is displayed and the setting is completed.
Press the [ENT] key to set another channel; or press the
[DISP] key for three seconds to return to the OPERATION
mode.
NOTE If you press the [ESC] key in the middle of setting, the indication returns to the
[ ] and already set data will be aborted.
PRINT FEED
DISP
ESC
PRINT FEED
DISP
ESC
3 sec
3 sec
CH UP
PRINT
CH UP
CH UP