Filter
Top Products
Using the Expression Pedals
ZOOM G9.2tt
36
The display indication changes as follows.
3. Push expression pedal 1 fully down
and then lift your foot off the pedal.
4. Press the [STORE/SWAP] key.
The adjustment is completed, and the unit returns
to the play mode.
HINT
• The module on/off switching point of expression
pedal 1 is not affected by the pedal position in
step 3. This position is always the same.
• For information about the module on/off
switching function, see page 33.
• If the indication "ERROR" appears, return to
step 2 and repeat the procedure.
■ Adjusting expression pedal 2
1. Hold down the [PEDAL 2 SETTING]
key while turning on power to the
unit.
The display indication changes as follows.
2. With expression pedal 2 fully raised,
press the [STORE/SWAP] key.
The display indication changes as follows.
3. Push expression pedal 2 fully down in
the vertical direction and then lift your
foot off the pedal and press the
[STORE/SWAP] key.
The display indication changes as follows.
PEDAL1...MAX
PEDAL1...MAX
PDL Calibration
PDL Calibration
Push strongly,
so that pedal
touches here
When foot is lifted,
pedal returns slightly
PEDAL2-V...min
PEDAL2-V...min
PDL Calibration
PDL Calibration
Pedal fully raised
PEDAL2-V...MAX
PEDAL2-V...MAX
PDL Calibration
PDL Calibration
Push strongly,
so that pedal
touches here
When foot is lifted,
pedal returns slightly
Using the Expression Pedals
ZOOM G9.2tt
37
4. Lift the stopper of expression pedal 2
to secure the pedal. Then turn the
pedal fully to the right and press the
[STORE/SWAP] key.
When you press the [STORE/SWAP] key, the
display indication changes as follows.
5. Push the stopper of expression pedal
2 down, turn the pedal fully to the
right, and press the [STORE/SWAP]
key.
When you press the [STORE/SWAP] key, the
adjustment is completed, and the unit returns to
the play mode.
HINT
If the indication "ERROR" appears, return to step 2
and repeat the procedure.
PEDAL2-H...min
PEDAL2-H...min
PDL Calibration
PDL Calibration
Expression pedal 2
(1) Enable
stopper
(2) Turn pedal
fully to the right
PEDAL2-H...MAX
PEDAL2-H...MAX
PDL Calibration
PDL Calibration
Expression pedal 2
(1) Disable
stopper
(2) Turn pedal fully
to the right