Filter
Top Products
46
Using the SD-50 as a MIDI Sound Module
Here’s how to select a tone from a list. Refer to PDF “Tone List” for information on the available tones.
1. Press the [PART] button a number of times to access the MIDI part screen.
page_part_meter.eps
2. Turn the [VALUE] dial to select the part whose tone you want to change.
page_part_meter.eps
3. Press the [INST] button to access the tone list screen.
page_patch_list-1.eps
4. Turn the [VALUE] dial to select a tone.
page_patch_list-2.eps
Press the [ ] button and Sample notes will be played so you can audition the tone.
5. Press the [ENTER] button.
The tone has now been selected.
page_part_meter-5h.eps
If you save the studio set, your selections will be saved to internal memory (p. 54).
Selecting a Tone For Each Part
Selecting From the Tone List
SD-50_e.book 46 ページ ２０１０年１月２５日 月曜日 午前１０時５２分