Filter
Top Products
67
Using the SD-50 as an SMF/Audio Player
A-B Repeat
This lets you repeatedly play back a specific region within a song.
This is a convenient way to listen repeatedly to a passage of interest.
1. Play back the song.
2. During playback, press the [ ] button.
Start point (A) has now been specified.
The [ ] button’s indicator will blink.
3. Press the [ ] button once again.
End point (B) has now been specified.
The [ ] button’s indicator will light.
The region (A-B) you specified in steps 2 and 3 will play repeatedly.
To cancel repeat playback, press the [ ] button once again.
If you set point A and then allow the song to play to its end without specifying point B, playback will repeat
between point A and the end of the song.
Playback operation buttons when using A-B Repeat
Cancelling the A-B Repeat settings
• With point A and point B specified, press [ ]; the point A and point B settings will be cleared.
• The point settings will also be cleared if you select a different song.
Button operation Explanation
Press the [ ] button Stop playback and move to point A.
Press the [ ] button Stop playback and move to point B.
Hold down the [ ] button several seconds Fast-forward. Playback will stop at point B.
Hold down the [ ] button several seconds. Rewind. Playback will stop at point A.
Press the [ ] button Playback will stop, with point A and B settings remembered.
SD-50_e.book 67 ページ ２０１０年１月２５日 月曜日 午前１０時５２分