Roland AT800 Electronic Keyboard User Manual


 
21
Before You Start Playing
Before You Start Playing
1.
Plug the speaker cable extending from the
stand into the Speaker connector located at
the rear of the AT-800’s bottom panel.
Pay attention to the shape of the speaker cable’s
connector, and insert it until you hear it click securely
into place.
fig.00-22.eps
1.
To open the lid, hold handles with both hands
and lift it straight up. Then, slide it to the rear.
2.
To close the lid, slowly pull it forward until it
stops. Then, gently lower it into place.
Be careful not to get your fingers caught when opening or
closing the lid. Adult supervision is recommended when
small children are going to be using the instrument.
To prevent accidents, be sure to close the lid before moving
the organ.
Make sure you don’t have anything (such as sheet music) on
the keyboard when you close the lid.
Connecting the Speaker Cable
Speaker Cable
Organ
side
Speaker
box side
Opening/Closing the Lid
NOTE
NOTE
NOTE
AT-800_e.book 21 ページ 2008年10月15日 水曜日 午前9時37分