Filter
Top Products
232
Various Other Settings
3.
In the Utility screen, touch <User Reset>.
fig.00-43-1.eps
The confirmation message appears on screen.
fig.00-43-2.eps
Touch <Cancel> to return to the System screen without
resetting the user memory.
4.
Touch <OK>.
The user memory will be reset to the factory-set state.
Never switch off the power while this operation is in
progress!
fig.00-40-2.eps
To reset all settings other than User memory to their original
factory settings, refer to p. 232. If you want to reset all
settings to their factory-set state, refer to p. 25.
You can restore all of the settings other than the User memory
(p. 82) to their original factory settings.
This function is called “Panel Reset.”
1.
Touch <System> on the Main screen.
The System screen appears.
fig.00-37.eps
2.
In the System screen, touch <Utility> to open
the Utility screen.
fig.00-38.eps
3.
In the Utility screen, touch <Panel Reset>.
fig.00-43-1.eps
NOTE
Restoring All Settings Other
Than the User Memory to the
Original Factory Settings
AT-800_e.book 232 ページ ２００８年１０月１５日 水曜日 午前９時３７分