Filter
Top Products
75
Selecting and Playing Sounds
Selecting and Playing Sounds
4.
Touch the part display of the part whose Octave Shift
settings you wish to change.
fig.01-30.eps
5.
Touch < > < > to adjust the settings.
The value can be set to a range of +/- 3 octaves.
fig.01-31.eps
6.
Touch <Exit>.
You will return to the Upper Keyboard/Lower Keyboard/Pedalboard screen.
You can open the Pedalboard
screen, Lower Keyboard
screen, or Upper Keyboard
screen with touching <Pedal>,
<Lower>, and <Upper>.
When the power is turned on,
the Octave Shift setting for each
part of the Pedal will be set to -
1 (1 octave down).
If you turn on the [Octave Up]
button, the Octave Shift will be
automatically set to “0”
regardless of the previous
setting. When you turn off the
[Octave Up] button, the Octave
Shift will always return to “-1”
regardless of the previous
setting.
NOTE
Please note that when you
apply the Octave Shift function
to certain voices, their pitch
could be stretched beyond their
recommended note ranges, and
they may not sound as
expected. Care should be taken
when using Octave Shift.
AT-800_e.book 75 ページ ２００８年１０月１５日 水曜日 午前９時３７分