Filter
Top Products
25
Before You Start Playing
Before You Start Playing
You can restore all of the settings stored in the ATELIER to what
they were when the instrument shipped from the factory. This
function is called “Factory Reset.”
1.
Touch <System> on the Main screen.
The System screen appears.
fig.00-37.eps
2.
In the System screen, touch <Utility> to open
the Utility screen.
fig.00-38.eps
3.
In the Utility screen, touch <Factory Reset>.
fig.00-39.eps
The confirmation message appears on screen.
fig.00-40-1.eps
If you touch <Cancel>, the Factory Reset will not be
performed, and you will return to the System screen.
4.
When you touch <OK>, the Factory Reset
operation will begin, and the settings will
return to the factory-set condition.
Never switch off the power while this operation is in
progress!
fig.00-40-2.eps
Loading factory default settings will erase any Registrations
currently in the memory of the ATELIER. To save the
Registrations you are currently using, refer to “Saving
Registration Sets” (p. 113).
If you want to restore settings other than those for User
Memory (p. 82) to the factory-set condition, touch <Panel
Reset> in the System Utility screen. If you want to restore
only the user memory to the factory-set condition, refer to
page 231.
Restoring All the Factory
Default Settings
NOTE
NOTE
NOTE
AT-800_e.book 25 ページ ２００８年１０月１５日 水曜日 午前９時３７分