Filter
Top Products
20
Panel Descriptions
[PAN/EQ]
Pressed to access a screen where you can set the pan (left/
right location of the sound) for the playback of each track or
for the input sound (p. 42, p. 49).
This, also, adjusts the tone (Low, High) for each track (p. 42,
p. 110).
[
LOOP EFFECTS]
Use this button to call up the screen for setting the send level
of each track respective to the loop effects (p. 43, p. 108),
switching between reverb and chorus, setting the various
parameters, and more.
“Using the Loop Effects/Track EQ” (p. 108)
“Loop Effect Parameter Functions” (p. 111)
[PITCH CORRECTION]
Use this button to turn on and off the Pitch Correction. This
function adjusts the pitch of recorded vocals.
“Using the Pitch Correction” (p. 114)
[REC MODE (Recording Mode)]
This button is used for selecting the recording mode.
Basic recording (p. 39, p. 48)
Bounce (Putting multiple tracks together) (p. 45, p. 58)
“Mastering” (p. 102)
MEMORY CARD indicator
This indicator will light up whenever data is being read from
or written to a memory card.
Never turn off the power while the indicator is lit. This may
corrupt the data on the memory card, possibly rendering the
card unusable.
MIC (Internal microphone)
This microphone can be used for recording with the BR-
900CD.
“Press the INPUT SELECT button of the instrument that you
want to record” (p. 34)
“Turning on the internal microphone” (p. 34)
Headphones jack ( )
Headphones (sold separately) are connected here. When
headphones are connected, the same output as that from
LINE OUT can be heard from the headphones.
* The headphone volume is adjusted with the MASTER fader.
MEMORY CARD slot
fig.00-202
This slot is where memory cards (CompactFlash) are inserted
when you want to save data. You cannot record unless you
have a memory card inserted here.
Eject button
Press this button to eject the memory card.
9
10
11
12
13
Eject button