Filter
Top Products
78
Organizing the Songs You’ve Recorded
Saving Memory on the
Memory Card (Song Optimize)
When you perform overdubbing or punch-in/out, the data
that you rewrite (replace) actually remains on the memory
card. In some cases, this unwanted data may occupy a
significant amount of space on the memory card. This will
cause the time available for recording to be less than it
should be.
By performing a “Song Optimize,” you can have the BR-
900CD erase any unnecessary data on the memory card and
increase the unused space.
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to “EDT,”
and press [ENTER].
fig.02-405d
3. Press CURSOR [ ] [ ] to move the cursor to “OPT,”
and press [ENTER].
“Are you sure?” appears in the display.
fig.02-406d
4. To continue with the optimization, press [ENTER]
(YES).
The Song Optimize function is carried out. When
completed, “Completed!” appears in the display, and
you are returned to the Play screen.
To cancel the operation press the [EXIT] (NO) (or
[UTILITY]).
* Depending on the situation, an appreciable length of time may
be required for Optimize to be completed. This is not a
malfunction. Do not turn off the power until Optimize has
completed.
* After you execute Optimize, it is not possible to undo/redo to
revert to the state before executing Optimize.
Naming Songs (Song Name)
When a new song is created, it is automatically given a name
such as “SONG 0001.” With your BR-900CD, you can use
“Song Name” to give each song a name, which helps you
manage and organize your songs.
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to “EDT,”
and press [ENTER].
fig.02-407d
3. Press CURSOR [ ] [ ] to move the cursor to
“NAM,” and press [ENTER].
The name of the song (Song Name) appears in the
display.
fig.02-408d
4. Press CURSOR [ ] [ ] to move the cursor to the
character you want to change.
5. Rotate TIME/VALUE dial to select the character.
* You can switch between upper case and lower case characters
by pressing [ENTER].
6. After the name is properly entered, press [UTILITY] (or
press [EXIT] repeatedly) to return to the Play screen.