Filter
Top Products
11
Installation
By attaching the included mounting bracket to the M-48, you can
place it on a desk at a convenient angle.
* Spread a soft cloth or similar material under the mounting bracket so
that the bracket does not scratch the surface on which it is placed.
1
Remove the two fastening screws indicated in the
illustration, and detach the bracket tray from the
mounting bracket.
2
Attach the mounting bracket to the M-48.
Insert the hooks located on the M-48’s bottom panel into the slots of
the mounting bracket.
You can use the included mounting bracket to attach the M-48 to
the top of a mic stand.
If the included bracket tray is attached to the mounting bracket,
you can use it to hold small items such an EDIROL R-09 series
recorder, a mic, or headphones.
* When shipped from the factory, the bracket tray is attached to the
mounting bracket.
If you want to attach only the mounting bracket to your mic stand,
remove the bracket tray before you continue. For details on how to
remove the bracket tray, refer to step 1 of “Placing the M-48 on a Desk
at an Angle” on this page.
If you’re attaching the mounting bracket to your mic stand, the
part you’ll use for attachment will depend on the diameter (3/8
inch or 5/8 inch) of your mic stand’s screw threads.
Use the part that’s correct for the mic stand you’re using.
Placing the M-48 on a Desk at an Angle
Mounting bracket
Bracket tray
Mounting bracket
Hooks
(on the bottom panel)
Attaching the M-48 to the Top of a Mic
Stand
About the diameter of the mic stand screw thread
* Be careful that items placed
on the bracket tray do not
fall off.
* The combined weight of
the items placed on the
bracket tray should not
exceed 700 grams (1.5 lbs.).
Be careful not to pinch your hand when attaching the M-48 to the mounting bracket. Doing so may cause personal injury.
M-48_e.book 11 ページ ２００９年２月２４日 火曜日 午前９時３３分