Filter
Top Products
16
Connecting External Devices
* The M-400 must be running system software version 2.0 or later.
* The M-48 can be set and managed from the M-400 only if the M-48 is connected to the M-400’s REAC B port via the S-4000D.
* In order to maintain the transmission quality of the digital REAC signal, use fully approved Cat5e Ethernet cable such as the 20 meter or 100 meter REAC
cables (SC-W20F/SC-W100S/W100S-R; sold separately).
Connecting the M-48 to a V-Mixing System
REAC A port
REAC B port
M-400 (FOH)
M-48 x 8
2
S-4000D
REAC port 1
Vocal 1 Vocal 2 Vocal 3 Keyboard Guitar BassLead Vocal Drum
16 channels of audio input
S-1608 (
Slave REAC device)
8 channels of audio output
Front speakers
8 channels of
audio output
S-1608 (Slave REAC device)
16 channels of audio input
REAC port
REAC port
REAC port 3
4
5
6
7
8
910
REAC cable or Cat5e Ethernet cable
REAC cable or
Cat5e Ethernet cable
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the
power on all devices before making any connections.
M-48_e.book 16 ページ ２００９年２月２４日 火曜日 午前９時３３分