Filter
Top Products
Installation
13
•
Nut x 1 (included)
•
Rubber washer x 1 (included)
•
Screws for fastening the M-48 x 2 (included)
1
Attach the mounting bracket to the mic stand.
Attach the rubber washer, mounting bracket, and other parts to your
mic stand in the order – shown in the illustration.
2
Tighten the nut to fasten the mounting bracket.
3
Insert the hooks located on the M-48’s bottom panel into
the slits of the mounting bracket.
4
To more permanently secure the M-48 to the mounting
bracket, fasten with the two included screws as shown
below.
If Your Mic Stand has 5/8 inch Threads
Items to use
Mic stand
Rubber washer (included)
Mounting bracket (included)
Nut (included)
Hooks
(on the bottom panel)
M-48_e.book 13 ページ ２００９年２月２４日 火曜日 午前９時３３分