Filter
Top Products
Installation
12
•
Wing nut x 1 (included)
•
Washers x 2 (included)
•
Rubber washer x 1 (included)
•
Screws for fastening the M-48 x 2 (included)
1
Attach the mounting bracket to the mic stand.
Attach the washers, mounting bracket, and other parts to your mic
stand in the order – shown in the illustration.
2
Tighten the wing nut to fasten the mounting bracket.
3
Insert the hooks located on the M-48’s bottom panel into
the slits of the mounting bracket.
4
To more permanently secure the M-48 to the mounting
bracket, fasten with the two included screws as shown
below.
If Your Mic Stand has 3/8 inch Threads
Items to use
Mic stand
Rubber washer (included)
Washers (included)
Washers (included)
Wing nut (included)
Mounting bracket (included)
Hooks
(on the bottom panel)
Be careful not to pinch your hand when attaching the M-48 to the mounting bracket. Doing so may cause personal injury.
M-48_e.book 12 ページ ２００９年２月２４日 火曜日 午前９時３３分