Filter
Top Products
100
Chapter 7. Connecting External Devices
■
Making the Connections
NOTE
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
1.
Turn the volume all the way down on the RG-7 and on
the device you’re about to connect.
2.
Switch off the power to the RG-7 and the device you’re
about to connect.
3.
Use a MIDI cable (sold separately) to connect the MIDI
connectors to each other.
Please refer to the connection examples below.
4.
Switch on the power to the RG-7 and the connected
device.
5.
Adjust the volume level on the RG-7 and the connected
device.
6.
You should also set the MIDI settings as needed.
For details on the MIDI-related settings, refer to previous
section.
Connection Examples:
Setup with a MIDI Sequencer
* When the RG-7 is connected to a MIDI sequencer, set it to
Local OFF. Refer to “Disconnecting the Internal Sound
Generator and Keyboard (Local Control)” (p. 101).
Connecting with a MIDI Sound Module
Making MIDI-related Settings
Here’s how you can set the transmit channel and other MIDI-
related settings.
■
MIDI Send Channel Settings
MIDI features sixteen MIDI channels, numbered 1–16.
Simply connecting a cable is not enough for communication
to take place. The connected devices must be set to use the
same MIDI channels. Otherwise, no sound will be produced,
and no sounds can be selected.
The RG-7 receives all channels 1–16.
1.
Press the [Function] (Exit) button, getting its indicator
to light.
2.
Press the [Song] (Select -) button or [ ] (Select +)
button to display the MIDI screen.
3.
Press the [Song] (Select -) button or [ ] (Select +)
button to get the value for “Tx Ch” (Transmit channel)
to flash.
4.
Press the [ ] (Value -) button or [ ] (Value +)
button to set the MIDI Transmit channel.
Value:
1–16
5.
Press the [Function] (Exit) button so the indicator goes
out.
Jack Panel of the RG-7
InOut
MIDI
Roland MT Series
OUTTHRU IN
MIDI
Sound Module
Jack Panel of
the RG-7
RG-7_e.book 100 ページ ２００５年２月１４日 月曜日 午前９時４５分