Filter
Top Products
81
Chapter 5. User Program Registration
Saving the User Program Sets
The 36 separate configurations of User Programs registered in the RG-7 can be saved
as sets in User Memory (p. 25) or to USB memory (sold separately).
When saving the settings to USB memory, connect the USB memory to the Ext
Memory port (p. 22).
1
Press the [Function] (Exit) button, getting its indicator to light.
2
Press the [Song] (Select -) button or [ ] (Select +) button to display
the USER PROGRAM screen.
fig.
3
Press the [Song] (Select -) button or [ ] (Select +) button so “SAVE” is
flashing.
fig.
4
Press the [Moving Key] (Enter) button.
The following screen appears.
fig.
5
Press the [Song] (Select -) button or [ ] (Select +) button so that the
“User Program save destination” is flashing.
fig.
6
Press the [ ] (Value -) button or [ ] (Value +) button to select the
“User Program save destination.”
Display
Description
User Memory
The User Program is saved in User Memory.
Ext Memory
The User Program is saved in USB Memory.
You can restore the content in
the User Memory to the
original default factory
settings. Refer to “Restoring
the Factory Settings (Factory
Reset)” (p. 73).
NOTE
Use USB memory available
from Roland. Proper operation
cannot be guaranteed if other
external memory products are
used.
RG-7_e.book 81 ページ ２００５年２月１４日 月曜日 午前９時４５分