Filter
Top Products
49
Chapter 2. Using the RG-7 with an External Display or Television
Connecting a Television
fig.
■
Making the Connections
* To prevent malfunction and/or damage to speakers or other devices, always turn
down the volume, and turn off the power on all devices before making any
connections.
1
Turn off the power to the RG-7 and the television to be connected.
2
Use a video cable (sold separately) to connect the RG-7’s Video Out jack
with the television’s video input jack.
3
Turn on the power to the RG-7.
4
Turn on the power to the television.
■
Switching Television Formats
If you find that the image quality of the television is poor, try switching the television
format.
1.
Press the [Function] (Exit) button so the indicator is lit.
2
Press the [Song] (Select -) button or [ ] (Select +) button to display
the EXT DISPLAY screen.
3.
Press the [ ] (Value -) button or [ ] (Value +) button to select the
television format.
fig.
Value:
PAL, NTSC
4.
Press the [Function] (Exit) button so the indicator goes out.
When you press the [DISPLAY] button on the remote control, the content being
displayed switches to the television.
To change the settings indicated in the display (Song Select screen
→
Lyrics screen
→
Slide show
→
Notation
→
Song Select screen...), refer to “Selecting What is To Be
Displayed on the External Display or Television” (p. 50).
Television
RG-7’s Jack Panel
Video Out jack
Video Cable
(Sold separately)
NOTE
You cannot display
information or images with a
television when an external
display is connected to the
Ext Display connector. To
use an television, first
disconnect the external
display from the Ext Display
connector, then connect the
television.
You can save this setting in the
RG-7’s memory using the
Memory Backup function (p.
72).
RG-7_e.book 49 ページ ２００５年２月１４日 月曜日 午前９時４５分