Filter
Top Products
89
Chapter 6. Changing Various Settings
Changing the Part That
Makes the Keys Move
With the RG-7, you can set the part to which the keyboard’s
movement is to be linked when the keyboard moves
automatically along with a song.
SMF music files and other such songs are composed of 16
parts (channels), with various performances recorded to the
different parts. For example, rhythm performances are often
recorded to Part 10, while the right-hand keyboard
performance is recorded to Part 4.
1.
Press the [Function] (Exit) button, getting its indicator
to light.
2.
Press the [Song] (Select -) button or [ ] (Select +)
button to display the “MISC Moving Key Part” screen.
3.
Press the [Moving Key] (Enter) button.
4.
Press the [Song] (Select -) button or [ ] (Select +)
button to select the part you want to change.
From the left, these are “part 1, part 2 ... part 15, and part
16.”
5.
Press the [ ] (Value -) button or [ ] (Value +)
button to switch the keyboard movement on or off.
The part to which the moving keyboard is linked is
indicated by “ ” in the screen; parts that do not cause
the keyboard to play are indicated by “–” in the screen.
When having the keys play automatically to a
performance recorded on the RG-7, select Part 1. In Split
performances, however, the right-hand performance is
recorded to Part “4,” while the left hand is recorded to
Part “3.”
6.
Press the [Function] (Exit) button so the indicator goes
out.
Changing the Remote
Control Settings
■
Disabling Use of the Remote
Control
You can prevent the included remote control from
controlling the RG-7 by turning the Remote Control function
off. This prevents settings from being altered inadvertently if
any buttons on the remote control are pressed by mistake.
→
The remote control’s functions are switched on and off together
with the infrared transmission function (p. 96). The remote
control’s functions are disabled when infrared transmission is
turned off.
1.
Press the [Function] (Exit) button, getting its indicator
to light.
2.
Press the [Song] (Select -) button or [ ] (Select +)
button to display the REMOTE screen.
3.
Press the [Song] (Select -) button or [ ] (Select +)
button to get the value for “Receive” to flash.
4.
Press the [ ] (Value -) button or [ ] (Value +)
button to switch the Remote Control function on or off.
5.
Press the [Function] (Exit) button so the indicator goes
out.
→
You can use the Memory Backup function to store these
settings to the RG-7 (p. 72).
Value
Description
On
The RG-7 can be controlled using the remote
control.
Off
The remote control is disabled.
* The infrared transmission functions used
by external devices are also disabled.
RG-7_e.book 89 ページ ２００５年２月１４日 月曜日 午前９時４５分