Filter
Top Products
62
Chapter 3. Performance
Cancelling the Transpose Function
1
Press the [ ] (Value -) and [ ] (Value +) buttons simultaneously
to select “0.”
Tuning to Other Instruments’ Pitches
(Master Tuning)
In situations such as when playing ensemble with other instruments, you can tune
the RG-7’s standard pitch to the pitch of another instrument. The standard pitch
generally refers to the pitch of the note that’s played when you finger the middle A
key. This tuning of all the instruments to a standard pitch is called “tuning.”
1
Press the [Function] (Exit) button, getting its indicator to light.
2
Press the [Song] (Select -) button or [ ] (Select +) button to display
the TUNE screen.
fig.
3
Press the [Song] (Select -) button or [ ] (Select +) button to get the
value for the Master Tuning setting to flash.
fig.
4
Press the [ ] (Value -) button or [ ] (Value +) button to change the
standard pitch.
Value
415.3 Hz–440.0 Hz–466.2 Hz
This is set to “440.0” when the power to the RG-7 is switched on.
5
Press the [Function] (Exit) button so the indicator goes out.
Example: Playing a song in E major while playing the keys
for C major
In this example, C is the root note in the key of C major. E, the root of E major, is the
third in C major. It is up four keys, including the black keys, so touch, then enter “4”
for the setting.
fig.
If you play C E G It will sound E G
#
B
You can save this setting in the
RG-7’s memory using the
Memory Backup function (p.
72).
RG-7_e.book 62 ページ ２００５年２月１４日 月曜日 午前９時４５分