Filter
Top Products
80
Chapter 5. User Program Registration
Calling Up Saved User Programs
You can easily call up User Programs.
1
Press the [Function] (Exit) button so the indicator goes out.
2
Hold down the [Function] (Exit) button and press the [ ] (Value -)
button or [ ] (Value +) button to select the User Program you want to
call up.
fig.
The display changes to indicate the registered buttons and other performance
settings. The tone name registered in the User Program appears in the lower row of
the screen.
Restoring the Standard Performance Settings (Settings in Effect When
the Power is Turned On)
After you have called up User Programs, you can use the following procedure to
restore the performance settings that are selected when the power is turned on.
1
Hold down the [Function] (Exit) button and press the [ ] (Value -)
button to select “User Program 01.”
fig.
2
While holding down the [Function] (Exit) button and the [ ] (Value -
) button once again.
The following screen appears.
fig.
The favorite performance settings are cancelled, restoring the settings to their status
when the power is turned on.
You can use the Pedal as a
dedicated switch for selecting
User Programs in order. For
more details, refer to “Using
the Pedal to Switch User
Programs” (p. 87).
RG-7_e.book 80 ページ ２００５年２月１４日 月曜日 午前９時４５分