Filter
Top Products
92
Chapter 6. Changing Various Settings
Initializing the User Memory
or USB Memory
You can completely erase the content of the User Memory or
USB memory and restore the original default factory settings
(initializing).
The RG-7 contains an internal memory area to which you can
save recorded performances and other data. This area is
called the “User Memory.”
The following content is stored in the User Memory.
• Content registered in the “Favorites” (p. 25)
• Content in saved User Program (favorite performance
settings) sets (p. 78)
1.
To initialize your USB memory, first connect the USB
memory to the Ext Memory port.
2.
Press the [Function] (Exit) button, getting its indicator
to light.
3.
Press the [Song] (Select -) button or [ ] (Select +)
button to display the FILE screen.
4.
Press the [Song] (Select -) button or [ ] (Select +)
button so “FORMAT” is flashing.
5.
Press the [Moving Key] (Enter) button.
6.
Press the [ ] (Value -) button or [ ] (Value +)
button to select the memory to be initialized.
7.
Press the [Moving Key] (Enter) button.
A confirmation message appears in the screen.
To return to the original screen without deleting the
content of the User Memory or USB Memory, press the
[Function] (Exit) button.
8.
Press the [Moving Key] (Enter) button once more.
The content of the User Memory or USB Memory is
deleted
* Be sure not to turn off the power as long as
“Executing...” is displayed. Turning off the power at
this time may corrupt the RG-7’s internal memory
and render it unusable.
* Executing this procedure does not initialize any settings other
than the content of the User Memory. To restore the factory
defaults for settings other than the User Memory content,
carry out Factory Reset (p. 73).
Using the V-LINK Function
Connecting the RG-7 to a V-LINK compatible image device
allows you to control the images with the RG-7.
V-LINK
V-LINK ( ) is a function that allows music and
images to be performed together. By using MIDI to connect
two or more V-LINK compatible devices, you can easily
enjoy a wide range of visual effects that are linked to the
expressive elements of a music performance.
1.
Press the [Function] (Exit) button, getting its indicator
to light.
2.
Press the [Song] (Select -) button or [ ] (Select +)
button to display the MIDI screen.
3.
Press the [Song] (Select -) button or [ ] (Select +)
button to get the value for “V-LINK” to flash.
4.
Press the [ ] (Value -) button or [ ] (Value +)
button to switch the V-LINK function on or off.
This is set to “Off” when you turn on the power.
NOTE
While V-LINK is switched on, no sound is produced when you
press any of the twelve keys at the left end of the keyboard.
5.
Press the [Function] (Exit) button so the indicator goes
out.
Value Description
User Memory
Content of the User Memory
Ext Memory
Content of the USB memory connected
to the Ext Memory port
Value
Description
On
The V-LINK function is switched on.
You can control images using the twelve
keys at the left end of the keyboard.
Off
The V-LINK function is switched off.
RG-7_e.book 92 ページ ２００５年２月１４日 月曜日 午前９時４５分