Filter
Top Products
24
Selecting and Playing Sounds
■
Selecting Solo Voice
The Solo section of the Upper keyboard is monophonic, that is, the Solo
voice will only sound for the highest note played on the Upper keyboard.
This allows you to play full chords and have the selected Solo voice playing
the highest (solo) note.
fig.02-11
1.
Press the Solo [Trumpet] button (indicator lights).
The name of the selected voice appears in the display for a few seconds.
fig.02-12
Play the Upper keyboard. The selected voice will sound by the highest note
played.
Each time you press the [Alternate] button you will switch between the two
voices which are assigned the button.
NOTE
If you press the Solo [To
Lower] button (indicator
lights p. 47), the Solo voice
can now be played by the
Lower keyboard, not by the
Upper Keyboard.
1
It is possible to change how
a Solo voice will sound.
Normally, the Solo voice
will be sounded by the
highest note you play on
the Upper keyboard, but
you can make settings so
that the last-played note
will sound the Solo voice.
You can also make settings
so that the Solo voice will
be sounded by all notes of
the keyboard to which the
Solo voice is assigned. For
details refer to “Changing
How the Solo Voice
Responds (Solo Mode)” (p.
89).
AT-15_e.book 24 ページ ２００５年１月２１日 金曜日 午後８時１４分