Filter
Top Products
82
Settings for the Composer
Re-recording the Pedalboard
Performance
You can erase the bass accompaniment of SMF music files
and record your own pedalboard performance, or re-record
the pedalboard performance of a song that was previously
saved on disk.
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to select
“BassReplaceRec.”
3.
Press the Value [-] and [+] buttons to switch the
Bass Replace Rec “ON” or “OFF.”
4.
Press the [Utility] button.
The Basic screen will reappear.
5.
Re-record the performance (p. 68, p. 76, p. 77).
Changing the Function of the
Expression Pedal
Specify how the Expression Pedal will function when your
performance is being recorded and when ATELIER song files
are being played back.
■
Function During Recording
Specify whether Expression Pedal operations will be
recorded or not while your performance is being recorded.
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to select
“Exp. Source.”
fig.09-06
3.
Press the [Rec] button.
4.
Press the Menu [ ] and [ ] buttons to select
“Recording.”
5.
Press the Value [-] and [+] buttons to specify the
pedal function.
fig.09-07
To return to the basic screen, press the [Utility] button.
Setting
Descriptions
OFF
The pedal performance will not be recorded.
ON
The pedal performance will be recorded.
Setting
Descriptions
PEDAL
Expression Pedal movements will be
recorded. The previous recording will be
erased as new songs are recorded.
COMPOSER
Expression Pedal movements will not be
recorded. The previous data will remain
without being erased.
AT-15_e.book 82 ページ ２００５年１月２１日 金曜日 午後８時１４分