Filter
Top Products
56
Using the Registration Buttons
Saving Registration Sets to a Floppy Disk
With the settings of Registration [1]–[8] buttons considered as one set, a
single floppy disk can store up to 99 sets of data. We recommend that
complex panel settings or Registrations you wish to keep be saved on disk.
Furthermore, when you save registrations created on the AT-15 to floppy
disks, you can call up their settings on other Atelier Series instruments and
use the registrations the same way.
1.
Make sure that the disk drive contains a disk that was
formatted by the AT-15 (p. 70).
2.
Press the [Registration] button (indicator lights).
3.
Press the Select [-] and [+] buttons to select the number that
you wish to save to.
Numbers which have not been used in the Saving operation will be
displayed as “- - -.”
fig.07-10
To cancel the operation, press the [Registration] button.
4.
Press the [Save] button.
5.
Press the Value [-] and [+] buttons to select the format in
which the data will be saved.
6.
Press the [Save] button to execute the save operation.
When the Registration set is saved to the floppy disk, the indication of
“- - -” will change to “USE.”
fig.07-11
If you have assigned a name, the Registration set will be saved to floppy
disk with that name.
ORIGINAL
Save formats that can be used with the AT-15
When saved in this format, the data can also be used
by AT-S Series devices.
R-Series
Save formats that can be used with AT-R Series
devices
You can press the Select [-]
[+] buttons to select the
format for saving the data.
AT-15_e.book 56 ページ ２００５年１月２１日 金曜日 午後８時１４分