Filter
Top Products
29
Selecting and Playing Sounds
■
Changing the Drum/SFX Set
Immediately after the power is turned on, the STANDARD drum set will
sound.
Let’s try selecting a different Drum Set or the Sound Effect set.
As the drum set, you can choose from 8 types of drum set and one type of
sound effect. When you change the drum set, the sound produced by each
note will change.
fig.02-19
1.
Press the [Drums/SFX] button (indicator lights).
2.
When the Drum Set name is displayed on the screen, press
the Value [-] [+] buttons to select a Drum Set or Sound Effect
Set.
The [Drums/SFX] button indicator will begin to blink.
fig.02-20
You can select from 8 different Drum Sets and one set of Sound Effects as
follows:
STANDARD, ROOM, POWER, ELECTRONIC, TR-808, JAZZ, BRUSH,
ORCHESTRA, SOUND EFFECTS
To stop mid-way through this or any procedure, press the [Display/Exit]
button.
3.
Press the [Drums/SFX] button once again.
The [Drums/SFX] button indicator will be lit constantly, and the selected
Drum/SFX set will be applied.
Refer to “Drum Set List” (p.
103) for details on which
drum sound or Sound
Effect will be played by
each note.
21, 3
You can also play the lower
manual to confirm the
drum set.
AT-15_e.book 29 ページ ２００５年１月２１日 金曜日 午後８時１４分