Filter
Top Products
43
Adding Various Effects to a Voice
Adding Modulation to the Sound
(Rotary Effect)
Rotary is an effect which simulates the sound of rotating speakers. There is
a choice of two settings: Fast and Slow.
The Rotary effect can be applied to the following sounds.
• Voices assigned to [Lower] button, [Full] button, and [Jazz] button.
• Voices assigned to the [Others] buttons for each part.
fig.04-05
1.
Select the voice to which you wish to apply the Rotary effect.
2.
Press the Rotary Sound [Fast/Slow] button to switch
between Rotary Fast (LED lit) and Rotary Slow (LED turned
off).
When you switch the rotary effect from “Fast” to “Slow,” the modulation
will slow down gradually, and when you switch from “Slow” to “Fast” the
modulation will speed up gradually.
LED lit (Fast)
The effect obtained is equivalent to speakers
being rapidly rotated.
LED turned off (Slow)
Effect simulating the slow rotation of speakers.
Some sounds do not
allow the Rotary effect to
b
e applied. For details
refer to “Voice List” (p.
102).
You can assign the
Rotary Sound [Fast/
Slow] button function to
the foot switches located
on each side of the
Expression Pedal (p. 87).
AT-15_e.book 43 ページ ２００５年１月２１日 金曜日 午後８時１４分