Filter
Top Products
35
Using the Rhythm Performance
Using a Rhythm from a Disk
The AT-15 contains 62 types of built-in Rhythms (Music Styles). Additional
Rhythms (Music Styles) are available on the Music Style disk included are
available. Here’s how to select a Rhythm (Music Style) from a Music Style
disk.
■
Inserting and Ejecting a Floppy Disk
1.
Hold the floppy disk with the label facing upwards, and
push it into the disk drive until it clicks into place.
fig.03-13
2.
Press the Eject button.
The floppy disk is ejected a little out of the slot. Gently grasp the end of the
floppy disk and pull it out.
■
Reviewing the Styles on a Music Style Disk
1.
Press the Rhythm [Disk] button (confirm that its indicator is
lit).
2.
Insert the Music Style disk into the disk drive.
3.
Use the Select [-] [+] buttons to select a Rhythm on the Music
Style disk.
4.
Press the [Start/Stop] button or the [Intro/Ending] button.
The selected Rhythm is played.
NOTE
If you’re using the disk
drive for the first time, be
sure to read the important
notes on page 6.
NOTE
Never eject a disk while
reading or writing is in
progress, since that can
damage the magnetic
surface of the disk,
rendering it unusable. (The
disk drive’s indicator will
light up at full brightness
when the drive is busy
reading or writing data.
Ordinarily, the indicator
will be less brightly lit, or
be extinguished.)
Eject buttonIndicator
Floppy Disk
Eject button
NOTE
The [Start/Stop] button
indicator will be blinking
while the Rhythm is being
loaded.
You can play the selected
Rhythm after loading is
completed.
AT-15_e.book 35 ページ ２００５年１月２１日 金曜日 午後８時１４分