Filter
Top Products
37
Using the Rhythm Performance
5.
Use the Value [-] and [+] buttons to select where you wish
the selected Rhythm to be stored.
6.
Press the Rhythm [Disk] button to confirm the storage-
destination Rhythm.
While the Rhythm is being loaded into internal memory, the following
screen will be displayed.
fig.03-18
Once the Rhythm has been accommodated in memory, the basic screen
reappears.
❍
If the following screen appears
The following screens appear when a rhythm has already been saved to the
save destination.
fig.03-17
To cancel the procedure, press the [Display/Exit] button.
7.
Press the Rhythm [Disk] button again to start loading the
Rhythm into the internal memory.
NOTE
Never remove the disk or
turn off the power while
the Rhythm data is being
loaded from disk into the
AT-15. If you do so, the
Rhythm data will not be
loaded into the AT-15,
and malfunctions could
result. After returning the
Rhythm stored in the
Rhythm [Disk] button to
the factory settings (see
p. 40), re-load the Rhythm
from disk.
AT-15_e.book 37 ページ ２００５年１月２１日 金曜日 午後８時１４分