Filter
Top Products
89
Various Other Settings
Using the Leading Bass
Function (Leading Bass)
When Automatic Accompaniment is used, and the Pedal [To
Lower] button is ON, the Pedal Bass voice will normally play
the root note (p. 109) of the chord you play on the Lower
keyboard. If the Leading Bass function is enabled, the lowest
note of the chord you play on the Lower keyboard will then
be used as the bass note (the bottom note of the chord).
For this reason, the bass note will be sounded differently
than normal when you play an inverted chord (p. 109).
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to select
“Leading Bass.”
3.
Press the Value [-] and [+] buttons to switch the
Leading Bass “ON” or “OFF.”
To return to the basic screen, press the [Utility] button.
➔
You can assign the Leading Bass functions to either of the foot
switches located on each side of the Expression Pedal (p. 88).
* While the intro or ending are playing, playing the lower
keyboard will not produce sound.
Changing How the Solo
Voice Responds (Solo Mode)
When the Solo voice is assigned to the Upper keyboard, you
can specify how the Solo voice will respond when more than
one key is pressed.
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to select
“Solo Mode.”
fig.12-05
3.
Press the Value [-] and [+] buttons to change the
setting for Solo Mode.
To return to the basic screen, press the [Utility] button.
Setting
Descriptions
ON
The Leading Bass function is on.
The pedal bass tone will sound the lowest
note of the chord you play in the lower
keyboard.
OFF
The Leading Bass function is off.
Setting
Descriptions
TOP NOTE
The Solo voice will sound the highest note
that is played for the Solo part.
LAST NOTE
The Solo voice will sound the note that
was most recently played for the Solo part.
POLYPHONIC
The Solo voice will sound all notes that are
played for the Solo part.
AT-15_e.book 89 ページ ２００５年１月２１日 金曜日 午後８時１４分