Filter
Top Products
Guided Tour - KM200 Input and Output Panel
1. Channel 1 MIC IN - XLR input connector for connecting to Channel 1’s
Low-noise Microphone Pre-amp.
2. Channel 1 Right Input - 1/4-inch phone jack for connecting line level
inputs like those from keyboards and drum machines.
3. Channel 1 Left Input (mono) - 1/4-inch phone jack for connecting line
level inputs. Use this input if you are connecting a mono signal source.
4. Channel 2 Right Input - 1/4-inch phone jack for connecting line level
inputs like those from keyboards and drum machines.
5. Channel 2 Left Input (mono) - This 1/4-inch phone jack is for connecting
line level inputs. Use this input if you are connecting a mono signal source.
6. Channel 3 Right Input - 1/4-inch phone jack for connecting line level
inputs like those from keyboards and drum machines.
7. Channel 3 Left Input (mono) - 1/4-inch phone jack for connecting line
level inputs. Use this input if you are connecting a mono signal source.
8. Channel 4 Right Input - 1/4-inch phone jack for connecting line level
inputs like those from keyboards and drum machines.
9. Channel 4 Left Input (mono) - This 1/4-inch phone jack is for connecting
line level inputs. Use this input if you are connecting a mono signal source.
10. Channel 4 Aux Left Input – RCA input for connecting the left side of an
external line level signal like those from a CD, MP3 player or sound card.
ENGLISH
5