Filter
Top Products
26
Calibration Includes
•
Cleaning (if required)
•
Valve adjustment (if required)
•
Battery capacity test
•
Internal computer program upgrade as necessary
•
Mechanical upgrades as necessary
•
Run-in test
•
Dynamic performance test
•
NIST-traceable calibration certificate
11.3 Returning Your Unit for Calibration or Service
Prior to returning your Cal=Trak for service or calibration, please contact Sierra Instruments, Inc. for an RMA number. You can
request an RMA number from any Sierra office or via our web site, www.sierrainstruments.com
. Do not return your calibrator
without an RMA number or your service may be delayed.
11.4 Shipment
When shipping the Sierra Cal=Trak please ensure that the packaging is adequate to protect the instrument. When possible the Cal=Trak
should be shipped in the optional storage case. Sierra Instruments, Inc. is not responsible for damage that occurs during shipment.
When transporting by air, the internal solenoid valve must be in the Open position to avoid possible cell damage. To open the valve, from
the “Run Menu”, press the Stop button. The valve position may be verified by sealing both the inlet and the outlet fitting. The piston should
move freely up and down the cylinder.
11.5 Replacement Parts & Accessories
Part Description
SL-800-B Base Unit
SL-800-10 Low Flow Cell, range 5 sccm to 500 sccm
SL-800-24 Medium Flow Cell, range 50 sccm to 5 slpm
SL-800-44 High Flow Cell, range 500 sccm to 50 slpm
PEL-1600 Pelican case with foam insert, fits 1 base, 1 cell & accessories
PEL-1650 Pelican case with foam insert & wheels, fits 1 bases, 2–3 cells & accessories
800 BAT Battery, 6V lead-acid
UNIVERSAL 120/240V battery charger; please specify plug configuration
FOAM-1600 Replacement foam insert for Pel-1600
FOAM-1650 Replacement foam insert for Pel-1650
LT-CABLE Leak test cable
CA-23 RS-232 cable for PC connection