Filter
Top Products
8
Each of Your Cal=Trak SL-800 Flow Cells Includes
• Cal=Trak SL-800 Flow Cell
• Leak Test Plug
• Certificate of Calibration (behind top cover foam insert)
• Warranty Card (behind top cover foam insert)
If you purchased your calibrator with the Cal=Trak case, it should look like this when you receive it:
5.0 Warnings
The Sierra Cal=Trak is not rated intrinsically safe and is not for use with explosive gasses or for use in explosive environments.
The Sierra Cal=Trak is designed for use at ambient pressures. This is easiest to obtain by leaving the outlet open to atmospheric
pressure. For vented applications, up to 5 inches of water column (12 mbar or 0.18 PSI) at the outlet fitting maybe used without impact on
measurement accuracy. More than this pressure will add additional uncertainty to the flow readings. Do not use the Cal=Trak with a
differential pressure above 0.35 bar (5 PSI). In other words, the pressure differential across the flow cell must be less than 0.35 bar or the
flow cell may be damaged. Please visit www.sierrainstruments.com for the most current product specifications.
The Sierra Cal=Trak is for use with clean laboratory air or other inert, non-corrosive gases only.