Sony OXF-R3 Music Mixer User Manual


 
CAUTION
Installation has to be done by a SONY authorized
technician.
WARNING
To prevent fire or shock hazard, do not expose the unit to
rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
VORSICHT
Um Feuergefahr und die Gefahr eines elektrischen Schlages
zu vermeiden, darf das Gerät weder Regen noch
Feuchtigkeit ausgesetzt werden.
Um einen elektrischen Schlag zu vermeiden, darf das
Gehäuse nicht geöffnet werden. Überlassen Sie
Wartungsarbeiten stets nur einem Fachmann.
For customers in the U.S.A
WARNING
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
The shielded interface cable recommended in this manual
must be used with this equipment in order to comply with
the limits for a digital device pursuant to Subpart B of Part
15 of FCC rules.
This symbol is intended to alert the user to the
presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
For customers in Europe
This product with CE marking complies with both the EMC
Directive (89/336/EEC) and the Low Voltage Directive
(73/23/EEC) issued by the Commission of the European
Community.
Compliance with these directives implies conformity to the
following European standards:
• EN60950 : Product Safety
• EN55103-1: Electromagnetic Interference (Emission)
• EN55103-2: Electromagnetic Susceptibility (Imunity)
This product is intended for use in the following
Electromagnetic Environment(s)
E4 (controlled EMC environment, ex. TV studio)
Pour les clients européens
Ce produit portant la marque CE est conforme à la fois à la
Directive sur la compatibilité électromagnétique (EMC)
(89/336/CEE) et à la Directive sur les basses tensions
(73/23/CEE) émises par la Commission de la Communauté
européenne.
La conformité à cas directives implique la conformtié aux
normes eropéennes suivantes:
• EN60950 : Sécurité des produits
• EN55103-1 : Interférence électromagnétiques (émission)
• EN55103-2 : Sensibilité électromagnétique (immunité)
Ce produit est prévu pour étre utilisé dans les environments
électromagnétiques suivants:
E4 (environment EMC contrôlé ex. studio de télévision).
Für Kunden in Europa
Dieses Product besitzt die CE-Kennzeichnung und erfüllt
sowahl die EMV-Directive (89/336/EEC) als auch die
Directive Niederspannung (73/23/CEE) der EG-
Kommission.
Die Erfüllung dieser Directiven bedeutet Konformität für die
folgenden Europäischen Normen:
• EN60950 : Produktsicherheit
• EN55103-1 : Electromagnetische Interferenz (Emission)
• EN55103-2 : Electromagnetische Empfindlichkeit
(Immunität)
Dies Produkt ist für den Einsatz unter folgenden
electromagnetischen Bedingungen ausgelegt:
E4 (kontrollierter EMV-Bereich, z.B. Fernsehstudio)
!