Filter
Top Products
Chapter 3 Getting Started 3-19
Chapter 3 Getting Started
1 Press {ACCESS} for the desired Channel.
2 At the Input Channel & Inserts panel, press either
{MIC} or {LINE} as required, and set the input GAIN
knob to a suitable setting.
3 Make sure {CHANS} is selected on the Select To
Faders panel (fire-up default).
4 At the Routing panel, select {L} and {R} (fire-up
default) if not already lit.
5 Adjust the level to the Main Output Bus with the
Channel Fader.
6 Open the Main Fader and turn up the CR Monitor
level.
3-10-1 To Route a Mic or Line Input to the Main Output Bus
134562