Filter
Top Products
Chapter 3 Getting Started 3-29
Chapter 3 Getting Started
3-10-11 To Set Up Super Send Groups from Multitrack
1 Press {ACCESS} for the first Channel to be routed
to a Super Send Group (SSG).
2 Make sure {CHANS} is selected on the Select To
Faders panel (fire-up default).
3 Make sure {SUPERSGs1-8} is selected in the SSG
masters section.
4 At the Routing panel, de-select {L} and {R} .
5 At the same panel, select the SSGs required,
{1/9} and {2/10} in this case.
6 At the Select To Faders panel (SEL section), select
{SUPERSGs1-8} , then adjust the Fader to 0dB in
the Central Faders panel.
7 Above the SSG 1 level knob select {MAIN} and its
{ACCESS} .
8 At the top of the Routing panel select {L} .
9 Repeat steps 7 and 8 for SSG 2 but select {R} at
the Routing panel.
10 Repeat steps 1 to 5 for further channels.
124,8 6 3 75