Filter
Top Products
Chapter 3 Getting Started 3-17
Chapter 3 Getting Started
3-9 Select To Pans
Select to Pans
The Pan Knobs above the faders are assignable in a similar manner to the
faders. Although their primary job is panning, they can also be used to
perform all channel level adjustments, such as input gain settings and Send
Bus levels. They are really Definable Knobs rather than just Pans.
As can be seen in the diagram below, the SELECT TO PANS panel
performs a function for the Pans similar to that of the SELECT TO
FADERS panel for the faders. All equivalent level and gain control
functions, on an in-line channel strip, may be assigned to the row of
Definable Knobs whose default setting is channel Pan.
A typical set-up could have Mic Gain controlled by the knobs, whilst the
faders control the M/T Send. With this set-up, all levels are easily adjusted
during tracking. Remember that dedicated knobs are always available on
the assignable panel areas in parallel for all level controls.
INPUT GAIN
SENDS
GROUP TRIM
M/T SEND
PAN
3-9 Select To Pans