Filter
Top Products
3-22 Chapter 3 Getting Started
Chapter 3 Getting Started
3-10 Basic Console Operations
1 Press {ACCESS} for the desired Channel.
2 Select {CHANS} on the Select To Faders panel
(fire-up default).
3 At the Input Channel & Inserts panel, select
‘MULTI’ in window number 4 using the {+} and
{–} buttons either side. Select its large {IN}
button to insert the multitrack into the signal path.
4 At the Pans panel, press {SEND} to select the signal
being fed to tape
3-10-4 To Monitor Signals To and From Tape
5 Or press {SEND} to select the signal from tape.
6 Open the Main Fader and turn up the CR Monitor
level.
7 Use the Channel Fader to adjust monitor level via
the Main Output Bus.
1247 65 3