Support User Manuals

Solid State Logic Soundscape Mixer Music Mixer User Manual

Open as PDF

of 109

Soundscape Mixpander

Page 64 of 109

– Switch Outputs button:

Interchanges the output channels.

– Toggle Mid On/Off button:

Clicking this button cuts the mid MS matrix input signal (as shown above), so that the effect of the

MS matrix on the side signal can be monitored easily.

– Toggle Side On/off button:

Clicking this button cuts the side MS matrix input signal (as shown above), so that the effect of the

MS matrix on the mid signal can be monitored easily.

– Toggle Matrix On/off button:

Clicking this button toggles MS decoding on (as shown) or off (inactive status).

NOTE: If MS decoding is turned off, the signals are still affected by the gain, width and bass

shelvingsettings.However,theasymmetryandrotationparameterswillhavenoeffectontheoutput

signals.

NOTE:IftheMSmatrixisactive,bothinputsignalsareattenuatedby6dB.Thereafter,theyare

subtractedandsummedin ordertoconstitutetherequiredleftandrightoutputsignals.

Switch Outputs button

Mid On/Off button

Side On/Off button

MS Matrix On/Off button

previous next