Filter
Top Products
Specifications
96 X2 Reference Manual
MIC Nominal Input Level -56 dBu to -8 dBu
LINE Nominal Input Level -44 dBu to +4 dBu
TAPE Nominal Input Level +4 dBu / -10 dBV Switchable
Maximum Gain:
MIC to L/R Master Out 70 dB
MIC to L/R Group Out 70 dB
MIC to Aux Sends 68 dB
Power Supply:
X2 Maximum Power 210 Watts
U.L. Rating 300 Watts
Input Module (24):
Phantom Power Aux Source Selector
Mic/Line Selector Monitor Pan
Phase (Ø) Reverse Monitor Peak LED Indicator
Mic/Line Gain Monitor Solo
Channel/Monitor Reverse Monitor Mute
High-Pass Filter Monitor L/R Assign
Hi EQ 45mm Monitor Fader
EQ to Monitor Selector Channel Pan
Low EQ Channel Peak LED Indicator
Hi Mid Gain Channel Solo
Hi Mid Frequency Channel Mute
Hi Mid Bandwidth (Q) Direct Source Selector
Lo Mid Gain Channel L/R Assign
Lo Mid Frequency Group Assign Selectors (1–8)
Lo Mid Bandwidth (Q) Aux 1-2, 3-4, 5-6, 7-8
Aux Source Selector Aux 1-2 Pan
Group Module (4):
Aux Level (A/B) Solo (A/B)
Hi EQ (A/B) Mute (A/B)
Lo EQ (A/B) Group Assign Left
Stereo Separation (A/B) Group Assign Right
Balance (A/B) Pre-Fade-Listen
Aux 1-2 Send (A/B) Mute
Assign Switches 1–8 and L/R Mix (A) 100mm Group Master Faders
Group Master Assign (B)
Master Module:
Dynamic Mute Automation Controls CR Source Selectors (L/R, Aux 1-2,
Solo Mute Ext. 1, Ext. 2)
3-Frequency Oscillator Phones Level
Solo Master Level Dim Switch
Aux Masters (8) Mono Switch
Aux Masters AFL (8) Talkback Mic
Aux Masters Mute (8) Mic Level
Studio Level Slate Switch
Studio CR/Aux 1-2 Selector Studio Talkback Switch
Control Room Level 100mm L/R Master Faders