Yamaha 01v DJ Equipment User Manual


 
Pre-fader/Post-fader Aux Sends 97
01V—Owner’s Manual
Pre-fader/Post-fader Aux Sends
The aux sends on input channels 1 through 24 and the effects returns can be configured
individually as pre-fader or post-fader sends. Pre-fader means that signals are sourced
before, and are not affected by the regular channel fader. Post-fader means that signals
are sourced after, and are affected by the regular channel fader. With a post-fader send,
the regular channel fader can be used to control the channel level and the aux send level
simultaneously.
For Input Channels 1–16 & the Effects Returns
1. Use the [AUX] buttons to locate an AUX PRE/POST page, as shown below.
The value below each PRE/POST switch indicates the position of the aux send fader.
The position of the corresponding aux send master fader is displayed at the top of the
page.
2. Use the [SEL] buttons or cursor buttons to select the PRE/POST switches,
and the [ENTER] button, PARAMETER wheel, or [–1/DEC] and [+1/INC]
buttons to set them.
The PRE/POST switches on input channels 13 and 14 (likewise 15 and 16) are perma-
nently linked. When input channels 1 through 12 are paired, or when aux sends are
configured as stereo pairs (“Pairing Input Channels” on page 52), their PRE/POST
switches are linked.
For Input Channels 17–24
1. Use the [OPTION I/O] button to locate OPTION page 2, as shown below.
2. Use [SEL] buttons 17 through 24 to select channels.
3. Use the cursor buttons to select the AUX PRE/POST switches, and the
PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.
When aux 1 and 2 are paired (“Pairing Aux Sends” on page 101), the PRE/POST
switches are linked.