Filter
Top Products
Recalling Mix Scenes 187
01V—Owner’s Manual
Recalling Mix Scenes
Mix scenes can be recalled from scene memories 0 through 99 manually, or remotely
using MIDI Program Change messages.
1. Use the [MEMORY] button to locate MEMORY page 1, as shown below.
2. Use the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to select
scene memories.
As each scene memory is selected, its title and number flash on the display.
The program list order can be set using the LIBRARY LIST ORDER option in prefer-
ences (“Setting 01V Preferences” on page 203).
3. Use the cursor buttons to select the RECALL switch, and then press the
[ENTER] button.
The mix scene is recalled, the scene memory title and number stop flashing, and the
EDIT indicator disappears.
If the RECALL CONFIRMATION option is turned on in the preferences (“Setting 01V
Preferences” on page 203), a confirmation dialog box appears. In this case, select OK,
and then press the [ENTER] button to confirm the recall.
If the INC/DEC MEMORY RECALL option is turned on in the preferences (“Setting
01V Preferences” on page 203), the [–1/DEC] and [+1/INC] buttons can be used to
select and recall scene memories. As the [–1/DEC] or [+1/INC] button is pressed, sub-
sequent scene memories that contain a mix scene are selected and recalled.
Mix scene recalls can be undone using the Recall Undo function. See “Undoing Mix
Scene Recalls” on page 189 for more information.
Note: When recalling mix scenes, be aware that volume levels may change suddenly as
channels are turned on and fader levels adjusted. Nobody likes sudden loud noises, or
speaker damage.