Filter
Top Products
154 Chapter 12—Effects
01V—Owner’s Manual
DELAY+REV
Delay and reverb effects in parallel.
1. (Maximum value depends on
the tempo setting)
2. For more information about the DELAY, NOTE, and TEMPO parameters, see “Setting
Delay, Freq, Note & Tempo Parameters” on page 137.
Parameter Range Description
DELAY L 0.0–1000.0 ms Left channel delay time
NOTE L
*1
Used in conjunction with TEMPO to determine left
channel DELAY L
FB.GAIN –99 to +99%
Feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
DELAY R 0.0–1000.0 ms Right channel delay time
NOTE R *1
Used in conjunction with TEMPO to determine right
channel DELAY R
DLY HI 0.1–1.0 Delay high-frequency feedback ratio
FB.DLY 0.0–1000.0 ms Feedback delay time
NOTE FB *1
Used in conjunction with TEMPO to determine
FB.DLY
DLY/REV 0–100%
Delay and reverb balance (0% = reverb, 100% =
delay)
REV TIME 0.3–99.9 s Reverb time
INI.DLY 0.0–500.0 ms Initial delay before reverb begins
REV HI 0.1–1.0 High-frequency reverb time ratio
DENSITY 0–100% Reverb density
HPF Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
TEMPO
*2
25–300 bps
Used in conjunction with NOTE parameters to
determine DELAY L, DELAY R, and FB.DLY