Filter
Top Products
94 Chapter 9—Aux Sends
01V—Owner’s Manual
About the Aux Sends
The 01V’s four aux sends, which can be used individually or in stereo pairs, feature
four-band parametric EQ and dynamics processors. Signals from input channels 1
through 16 and the effects returns can be sent to aux sends 1 through 4, while those
from input channels 17 through 24 can be sent to aux sends 1 and 2. Channel aux sends
can be configured individually as pre-fader or post-fader sends. The 01V does not have
dedicated aux send connections. Instead aux sends must be assigned to the Option I/O
digital outputs or omni outs.
The 01V does not have dedicated aux return inputs. Use the input channels to return
aux signals. Stereo return signals can be connected to input channels 13/14 and 15/16.
The onboard effects are explained in their own chapter. See “Effects” on page 119 for
more information.
Option I/O & the Aux Sends
Aux send signals can be assigned to the Option I/O digital outputs. See “About Option
I/O Cards” on page 216 for more information.
Omni Outs & the Aux Sends
Aux send signals can be assigned to the omni outs. See “Assigning Omni Outs” on page
116 for more information.
Monitoring Aux Sends
Aux sends can be monitored using the monitor out or phones. See “Monitor Setup” on
page 78 for more information.
Metering Aux Sends
Aux send signal levels can be metered on the HOME pages. See “Metering Signal Lev-
els” on page 83 for more information.