Yamaha Digital Mixing Console DJ Equipment User Manual


 
116 Chapter 11—Omni Outs
01V—Owner’s Manual
About the Omni Outs
The 01V’s four omni outs can be used as aux send outputs, bus out outputs, additional
stereo outputs, or post-fader direct outputs for input channels 1 through 16. Each omni
out features a variable output delay of up to 300 milliseconds.
Omni Outs
Omni out signals are converted to analog
using 18-bit D/A converters, and then output
via balanced 1/4-inch phone jacks with a
+4 dB nominal output level.
Assigning Omni Outs
Omni outs are initially assigned to aux sends 1 through 4. They can also be assigned to
the bus outs, the left and right channels of the stereo output, or post-fader direct out-
puts of input channels 1 through 16.
1. Use the [PAN/ROUTING] button to locate PAN/ROUT page 4, a shown
below.
2. Use the cursor buttons to select the OMNI OUT parameter boxes, and
the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to select
sources for the omni outs.
3. Press the [ENTER] button to confirm your selection.
OMNI OUT
+4dB (BAL)
3421