Yamaha Digital Mixing Console DJ Equipment User Manual


 
130 Chapter 12—Effects
01V—Owner’s Manual
Viewing Effects Returns Settings
Settings for the effects returns can be viewed, and certain parameters adjusted on VIEW
pages 1 and 2.
1. Use the effects returns [SEL] button to select an effects returns.
RTN1 or RTN2 appears on the display, indicating that an effects return is selected.
2. Use the [VIEW] button to locate VIEW pages 1 and 2, as shown below.
3. Use the cursor buttons to select the parameters, and the PARAMETER
wheel, [–1/DEC], [+1/INC], and [ENTER] buttons to set them.
Parameters are explained in the following sections.
Metering Effects Returns
Effects returns signal levels can be metered on the EFFECT and VIEW pages. See “Using
the Effects” on page 123 and “Viewing Effects Returns Settings” on page 130.
Applying EQ to Effects Returns
Effects returns feature four-band parametric EQ. See “EQ” on page 61 for more infor-
mation. The EQ can be turned on or off, and the EQ curve viewed on the VIEW page.
See “Viewing Effects Returns Settings” on page 130 for more information.
Muting Effects Returns
Effects returns can be turned on and off (i.e., muted) using the effects returns
[ON] buttons. When an effects returns is on, its [ON] button lights up.
ON