Filter
Top Products
Metering the Stereo Output 89
01V—Owner’s Manual
Metering the Stereo Output
Stereo output signal levels can be metered using the L STEREO R meters or HOME
page 4 meters. See “Metering Signal Levels” on page 83 for more information.
Routing Signals to the Stereo Output
Input channels 1 through 24 and the effects return can be routed to the stereo output.
See “Routing Input Channels” on page 49 for more information.
Viewing Stereo Output Settings
Settings for the stereo output can be viewed, and certain parameters adjusted on VIEW
pages 1 and 2.
1. Press the [HOME] button, and then the MASTER [SEL] button.
ST appears on the display, indicating that the stereo output is selected.
2. Use the [VIEW] button to locate VIEW pages 1 and 2, as shown below.
3. Use the cursor buttons to select the parameters, and the PARAMETER
wheel, [–1/DEC], [+1/INC], and [ENTER] buttons to set them.
Parameters are explained in the following sections.