Yamaha Digital Mixing Console DJ Equipment User Manual


 
158 Chapter 12—Effects
01V—Owner’s Manual
4. Select the (PLAY) switch, and press the [ENTER] button to start
recording.
The bar below the REC and PLAY switches fills up as recording progresses.
With the REC MODE is set to INPUT, recording starts automatically when an input
signal exceeds the TRG LVL.
5. To play back the sample, select the (PLAY) switch, and then press the
[ENTER] button.
With the PLY MODE is set to INPUT, playback starts automatically when an input sig-
nal exceeds the TRG LVL.
Use the PLY MODE parameters to set the type of playback, and the START, END, and
LOOP parameters to edit the sample.
Be aware that samples are lost when another type of effect is recalled or the 01V is
turned off.