Filter
Top Products
Control panel
22
Meter select section
In this section you can select the source whose level
will be shown in the meter bridge section. Only one of
the sources 1–3 can be selected.
A M1–M8 switch
When this switch is turned on, the M1/M9/
MATRIX1–M8/M16/MATRIX8 meters (page 25) will
show the output levels of MIX OUT 1–8. At this time,
the indicator located at the left of the switch will light.
B M9–M16 switch
When this switch is turned on, the M1/M9/
MATRIX1–M8/M16/MATRIX8 meters (page 25) will
show the output levels of MIX OUT 9–16. At this
time, the indicator located at the left of the switch will
light.
C MATRIX switch
When this switch is turned on, the M1/M9/
MATRIX1–M8/M16/MATRIX8 meters (page 25) will
show the output levels of MATRIX OUT 1–8. At this
time, the indicator located at the left of the switch will
light.
Control section
On the M3000A, on/off settings for the mono/stereo
input channels, the output channels of the mix sec-
tions, and STEREO A OUT can be stored as a “scene”
(memory numbers 1–128 can be rewritten, and 129–
130 are read-only). In this section you can save and
read scene memories. (For details on using scene
memories, refer to page 31.)
METER SEL
M9-M16
M1-M8
MATRIX
A
B
C
DIRECT
RECALL
8
7
6
5
4
3
2
1
SCENE
MEMORY
ENTER
90
87
5
6
4
3
21
CHECK
STORE
MEMORY
RECALL
UTILITY
A
B
C
D
8
E
G
6