Filter
Top Products
About the Scene Memory function
36
• If the CC (control change) parameter of utility
mode is set to “ ” (mute group), only control
change numbers (105–112) which correspond to
mute groups will be transmitted or received.
Using mute groups
When the utility mode oP (recall operation) parame-
ter is set to “ ” (refer to page 34), the DIRECT
RECALL 1–8 switches will function as “mute group”
switches, and the scenes of memory numbers 1–8 can
be used as mute groups. If two or more DIRECT
RECALL switches are turned on, channels or buses
which are off (muted) in the corresponding scenes
will be turned off (while the ON status stored in these
scenes is ignored).
The following diagram shows the difference in opera-
tion between when the oP parameter is set to “ ”
(direct recall) and “ ” (Mute group). If the oP
parameter is set to “ ,” recalling a new scene will
cause the channels or buses to be switched on/off
according to the settings saved in that scene. In con-
trast if this parameter is set to “ ,” two or more
DIRECT RECALL 1–8 switches can be turned on, and
all channels or buses which are muted (off) in any of
the mute groups will be muted.
Control No. ON/EDIT Switch Control No. ON/EDIT Switch
60 CH INPUT 56 90
61 MIX 1 OUT 91
62 MIX 2 OUT 92
63 MIX 3 OUT 93
64 MIX 4 OUT 94
65 MIX 5 OUT 95
66 MIX 6 OUT 96
67 MIX 7 OUT 97
68 MIX 8 OUT 98
69 STEREO A OUT 99
70 100
71 101
72 102
73 MIX 9 OUT 103
74 MIX 10 OUT 104
75 MIX 11 OUT 105 MUTE GROUP 1
76 MIX 12 OUT 106 MUTE GROUP 2
77 MIX 13/14 OUT 107 MUTE GROUP 3
78 MIX 15/16 OUT 108 MUTE GROUP 4
79 109 MUTE GROUP 5
80 110 MUTE GROUP 6
81 111 MUTE GROUP 7
82 112 MUTE GROUP 8
83 113
84 114
85 115
86 116
87 117
88 118
89 119
8
7
6
5
4
3
2
1
Mute group 1 (scene memory number 1)
MUTE
(OFF)
ON ON MUTE
(OFF)
ON
Mute group 3 (scene memory number 3)
ON ON ON MUTE
(OFF)
MUTE
(OFF)
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
The on/off settings of memory number 1
are recalled
When Direct Recall is used
OFF ON ON OFF ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
8
7
6
5
4
3
2
1
Switch to the on/off settings of memory
number 3
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON ON ON OFF
OFF
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON
ON/
EDIT
CHECK
ON